2026/4/6
فارسی
Saeed Farahany

Saeed Farahany

Academic rank: Assistant Professor
ORCID: 0000-0002-1532-0416
Education: PhD.
H-Index: 32
Faculty:
ScholarId: View
E-mail: farahany [at] bzte.ac.ir
ScopusId: View
Phone:
ResearchGate:
Home

Research activities

Journal Papers
Study of the Interaction Between Bismuth and Antimony on Solidification Kinetics, Eutectic Microstructure, and Mechanical Behaviour of Secondary Al–Si–Cu Alloys Saeed Farahany, Giulio Timelli, Alberto Fabrizi (2025)
Interactive Effect of Bismuth and Antimony on Modification Efficiency of Strontium in ADC12 Die-cast Alloy Saeed Farahany, Giulio Timelli, Alberto Fabrizi (2025)
Effect of Gadolinium Addition on the Thermal, Microstructural, Mechanical, and Tribological Properties of Recycled Al-0.5Fe-0.5Si alloy Ali Mohammad Altameemi, Tuty Asma Abu Bakar, Saeed Farahany, Mohd Ayub Sulong, Hamidreza Ghandvar (2025)
Effect of Cadmium and Strontium/Cadmium Ratio on the Microstructure, Solidification Characteristics, and Mechanical Properties of Al-7Si-0.4Mg Cast Alloy Saeed Farahany, Giulio Timelli (2025)
Combined Effects of Cadmium and Strontium on the Solidification Kinetics, Microstructure, and Mechanical Properties of AC4C and ADC12 Cast Alloys Saeed Farahany, Giulio Timelli (2025)
Tailoring the solidification behaviour of recycled Al–Fe–Si alloy through gadolinium additions: a thermal analysis and microstructural investigation Saeed Farahany, Mehdi Malekan, Ali Mohammad Altameemi, Taha Nasirpour, Shaghayegh Sedaghatpour, Sina Vaziri, Parsa Pirhadi (2025)
Thermal characterization of newly developed bioresorbable magnesium-based alloys for implant applications Mariusz Krol, Anna Woźniak, Katarzyna Cesarz-Andraczke, Przemysław Snopiński, Saeed Farahany (2025)
The Effect of Bismuth and Tin on Mechanical and Tribological Performance of Compocast Aluminum Hybrid Composites Reinforced with Al2O3, ZrO2, and SiC Saeed Farahany, Mohammad Khalesi Hamedan, Mohammadreza Salehloo, Ali Mohammad Altameemi, Ali Ourdjini, Hamidreza Ghandvar, Mariusz Krol (2025)
Synthesis and Characterization of Novel Aluminum Composites: A Compo-Casting Approach with ZrO2 , Al2O3 , and SiC Saeed Farahany, Mohammad Khalesi Hamedan, Mohammadreza Salehloo, Mariusz Krol, Elham Cheraghali (2024)
Solidification Characteristics of Ex situ Particulate-Reinforced Aluminum Matrix Composites Saeed Farahany, Hamidreza Ghandvar, Nur Azmah Nordin (2024)
Effect of Triple Tempering Temperature on Microstructure, Mechanical, and Wear Properties of K340 Cold Work Tool Steel Saeed Farahany, Mehdi Ziaie, Nur Azmah Nordin (2023)
On the effect of praseodymium on solidification characteristics, microstructure, and mechanical properties of commercial ADC12 alloy Saeed Farahany, Hamidreza Ghandvar (2023)
Effect of heat treatment parameters on microstructure, defects, and properties of Al-16Si-6Cu automotive shift fork: quantitative evaluation perspective Saeed Farahany, Mustafa Abazari (2022)
Neuro-fuzzy based predictive model for cutting force in CNC turning process of Al–Si–Cu cast alloy using modifier elements Mohsen Marani, Mohammadjavad Zeinali, Saeed Farahany, Chris K Mechefske (2021)
Cooling curve thermal analysis of Al–Mg2Si–Cu–xSr composite Saeed Farahany, Nur Azmah Nordin, Hamidreza Ghandvar (2020)
A novel method to enhance the performance of an ex-situ Al/Si-YSZ metal matrix composite Hamidreza Ghandvar, Saeed Farahany, Tuty Asma Abu Bakar (2020)
Microstructure, phase evolution and corrosion behaviour of the Zn–Al–Mg–Sb alloy coating on steel L Hai Tat, Hamidreza Bakhsheshi-Rad, Esah Hamzah, M H Cho, A Mostafa, Saeed Farahany (2020)
Role of Sr on microstructure, mechanical properties, wear and corrosion behaviour of an Al–Mg2Si–Cu in-situ composite Saeed Farahany, Hamidreza Ghandvar, Mansour Bozorg, Nur Azmah Nordin, Ali Ourdjini, Esah Hamzah (2020)
Microstructure characterization and maximization of the material removal rate in nano-powder mixed EDM of Al-Mg2Si metal matrix composite—ANFIS and RSM approaches Mehdi Hourmand, Ahmed Sarhan, Saeed Farahany, Mohd Sayuti (2019)
ffect of Wettability Enhancement of SiC Particles on Impact Toughness and Dry Sliding Wear Behavior of Compocasted A356/20SiCp Composites Hamidreza Ghandvar, Saeed Farahany, Mohd Hasbullah Idris (2018)
Computer-aided cooling curve thermal analysis and microstructural evolution of Mg–5Zn–xY cast alloys Hassan Jafari, Maryam Khalilnejad, Saeed Farahany (2017)
Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth Mohsen Marani, Saeed Farahany, Victor Songmene (2017)
Characterization of Phase Formation in Al-20%Mg2Si-2%Cu Metal Matrix Composite Nur Azmah Nordin, Tuty Asma Abu Bakar, Esah Hamzah, Saeed Farahany, Ali Ourdjini (2017)
Microstructure development, phase reaction characteristics and properties of quaternary Zn-0.5 Al-0.5 Mg-xBi hot dipped coating alloy under slow and fast cooling rates Saeed Farahany, L Hai Tat, Esah Hamzah, Hamidreza Bakhsheshi-Rad, M H Cho (2017)
Microstructure Characterization, Mechanical, and Tribological Properties of Slow-Cooled Sb-Treated Al-20Mg2Si-Cu In Situ Composites Saeed Farahany, Hamidreza Ghandvar, Nur Azmah Nordin, Ali Ourdjini (2017)
Fabrication of biodegradable Zn-Al-Mg alloy: mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities Hamidreza Bakhsheshi-Rad, Esah Hamzah, L Hai Tat, Masoud Kasiri-Asgarani, Saeed Farahany, M H Cho, E Akbari (2017)
Thermal Characteristics, Mechanical Properties, In Vitro Degradation and Cytotoxicity of Novel Biodegradable Zn–Al–Mg and Zn–Al–Mg–xBi Alloys Hamidreza Bakhsheshi-Rad, Esah Hamzah, L Hai Tat, M H Cho, Masoud Kasiri-Asgarani, Mamoun Medraj, A Mostafa, Saeed Farahany (2017)
Effect of primary and eutectic Mg2Si crystal modifications on the mechanical properties and sliding wear behaviour of an Al–20Mg2Si–2Cu–xBi composite Saeed Farahany, Hamidreza Ghandvar, Nur Azmah Nordin, Ali Ourdjini, Mohd Hasbullah Idris (2016)
Effect of modifier elements on machinability of Al-20%Mg2Si metal matrix composite during dry turning Noordin Mohd Yusof, Abbas Razavykia, Saeed Farahany, Alireza Esmaeilzadeh (2016)
Flake-fibrous transition of silicon in near-eutectic Al-11.7Si-1.8Cu- 0.8Zn-0.6Fe-0.3Mg alloy treated with combined effect of bismuth and strontium Saeed Farahany, Arne K. Dahle, Ali Ourdjini, Alireza Hekmat-Ardakan (2016)
Microstructure, mechanical properties and corrosion behavior of Al–Si–Cu–Zn–X (X= Bi, Sb, Sr) die cast alloy Saeed Farahany, Ali Ourdjini, Hamidreza Bakhsheshi-Rad (2016)
Wettability Enhancement of SiCp in Cast A356/SiCp Composite Using Semisolid Process Hamidreza Ghandvar, Saeed Farahany, Jamaliah Idris (2015)
Evaluation of cutting force and surface roughness in the dry turning of Al–Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach Abbas Razavykia, Saeed Farahany, Noordin Mohd Yusof (2015)
Microstructure development, phase reaction characteristics and mechanical properties of a commercial Ale20%Mg2SiexCe in situ composite solidified at a slow cooling rate Nur Azmah Nordin, Saeed Farahany, Tuty Asma Abu Bakar, Esah Hamzah, Ali Ourdjini (2015)
Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn–3Mg alloy as potential biodegradable implant material M.S. Dambatta, S. Izman, D. Kurniawan, Saeed Farahany, Bashir Yahaya, H Hermawan (2015)
Conference Papers
Speech
Composite Materials Saeed Farahany (2022)
Refereeing
Transient heat flow thermal parameters tailoring solidification microstructure and hardness in Al-33Cu-1Bi (wt.%) alloy Saeed Farahany (2025)
On the influence of the microstructure and mechanical properties of hypoeutectic Al- 10Mg2Si in situ composite with yttrium addition Saeed Farahany (2024)
Effect of Ti、V and Zr on the organization and properties of piston alloy Saeed Farahany (2024)
Assessment of Ce-rich intermetallics formation in Al-Cu-Mg-xCe alloys using thermal analysis cooling curves Saeed Farahany (2024)
Effect of Sr modification on the microstructures, mechanical properties and thermal conductivity of hypoeutectic Al-13.6Cu-6Si alloys Saeed Farahany (2024)
Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite Saeed Farahany (2023)
Effects of Solid Solution Treatment on Microstructure and Properties of B4Cp Reinforced Alloyed Al-Zn-Mg-Cu Matrix Saeed Farahany (2023)
Dissolution of the second phases and transformation from Mg2Si to Q-Al5Cu2Mg8Si6 in solution heat treated quaternary Al-alloys Saeed Farahany (2023)
Effect of Sr on microstructure and mechanical properties of LM6 Al-alloy Saeed Farahany (2022)
Investigation of the effects of artificial ageing on the microstructure, hardness, and wear characteristics of modified Al-18Si-3.6Cu all Saeed Farahany (2022)
Effect of B4Cp volume fraction on microstructure and properties of B4Cp/SiCp hybrid reinforced 2124 aluminum matrix composites Saeed Farahany (2022)
Effects of combined addition of (cerium plus ytterbium) on microstructure and mechanical properties of aluminiumsilicon-magnesium-copper-chromium casting alloy subjected to heat treatment Saeed Farahany (2022)
On the grain refinement of Mg-Al binary alloys inoculated by in-situ oxidation Saeed Farahany (2021)
Effect of Bi modification and ultrasonic treatment on microstructure evolution and mechanical properties of AlMg5Si2Mn alloy Saeed Farahany (2021)
Effect of beryllium addition on the microstructures and mechanical properties of the 15%Mg2Si/Al-8Si composite Saeed Farahany (2021)
Effect of magnetic-mechanical coupled stirring on the distribution of B4C particles in Al-B4C composites Saeed Farahany (2021)
Thixoforming of an Al-Si-Zn-Mg Alloy - Thermodynamic Characterization, Microstructural Evolution and Rheological Behavior Saeed Farahany (2020)
Prediction of modified morphology for primary Mg2Si induced by trace-element adsorption: A first-principles study Saeed Farahany (2020)
Microstructure evolution and performance improvement of hypereutectic Al– Mg2Si metallic composite with Ca and/or Sb Saeed Farahany (2020)
Strength improvement in high pressure die-cast Al-Si-Cu alloys by synergistic strengthening effect of Q and θ phases Saeed Farahany (2020)
Toward unraveling the effects of Pb element on the microstructure, tensile properties and machinability of Al–15% Mg2Si metal matrix composite Saeed Farahany (2019)
The effects of varying Mg and Si levels on the microstructural inhomogeneity and eutectic Mg2Si morphology in die-cast Al-Mg-Si alloys Saeed Farahany (2018)
Effect of Alloying Elements Content on Microstructure and Electrochemical Properties of Zn-Al-Mg Alloys Saeed Farahany (2018)
Microstructure and corrosion behavior of Al3Ti/ADC12 composite modified with Sr Saeed Farahany (2018)
Effects of Zr addition on solidification characteristics of Al-Zn-Mg-Cu alloy using thermal analysis Saeed Farahany (2017)
Comprehensive evaluation of modification level assessment in Sr-modified aluminium alloy Saeed Farahany (2017)
Assessment of solidification characteristics of carbon-inoculated Mg-3%Al melt by thermal analysis Saeed Farahany (2017)
Microstructure and corrosion behavior of Al3Ti/ADC12 composites modified with Sr Saeed Farahany (2017)
Effects of Ti and La additions on the microstructures and mechanical properties of B-refined and Sr-modified Al-11Si alloys Saeed Farahany (2017)
Exploring the mechanism of LiFePO4 hydrothermal synthesis using in situ Calvet calorimetry Saeed Farahany (2016)
Influence of the simultaneous addition of Sr and La on the microstructure of the secondary Al-Si-Cu-Fe alloy Saeed Farahany (2016)
Thermal analysis of in-situ Al2O3/SiO2(p)/Al composites fabricated by stir casting process Saeed Farahany (2016)
Numerical and physical simulation of rapid microstructural evolution of gas atomised Ni superalloy powders Saeed Farahany (2016)
Investigation on the solidification course of Al-Si alloys by using a numerical Newtonian thermal analysis method Saeed Farahany (2016)
Study of Solidification Process and Microstructure of Transition Layer of Cu-Al Composite Cast Prepared by a Method of Pouring Molten Aluminum Saeed Farahany (2016)
Effect of Ta Additions on the Microstructure, Damping, and Shape Memory Behaviour of Pre-Alloyed Cu-Al-Ni Shape Memory Alloys Saeed Farahany (2016)
Prediction of shrinkage porosity in femoral stem of titanium investment casting Saeed Farahany (2016)
Effects of Mn and Sn on Al-7Si-Mg alloy modified by Sr and Al-5Ti-B Saeed Farahany (2015)
Aqueous gelcasting of water-soluble calcia-based ceramic core for investment casting using epoxy resin as a binde Saeed Farahany (2015)
Powered By Jiro